Lash Lift
1 – PREP YOUR LASHES
A. Please ensure you have read and understood all
instructions, safety directions, and aftercare before use. B. Clean the eye
area thoroughly with an oil-free remover and ensure the lashes are clean and
completely dry before beginning. C. Perform a patch test before use. Wait 24
hrs. Discontinue immediately if any redness, irritation, swelling, or
discomfort occurs. D. Place the Under Eye Pads under the eyes to cover and
protect the lower lashes.
2 – SELECTING THE SILICONE SHIELD (FOR STEP 2 ONLY)
Shields come in two sizes (not included in kit):
Small and Medium. Selecting the correct size determines the curl strength
and final result.
• Size S – Small (Strong Lift) Best for shorter
lashes or if you prefer a more dramatic, stronger curl with a high root
lift.
• Size M – Medium (Natural Lift) Best for medium to
long lashes, or if you prefer a softer, natural curl.
Using the Small shield creates a stronger curl,
while using the Medium shield creates a gentler Korean-st
3 – STEP 1: APPLY CREAM #1 (LIFTING CREAM) – NO
SHIELDS
A. With lashes lying flat on the under-eye pad,
apply Cream #1 directly onto the natural lashes.
B. Maintain a 1 mm distance from the waterline. Do
not apply to the skin.
PROCESSING TIME: • Thin / fine lashes: 7
minutes
• Normal lashes: 8–10 minutes
• Thick / coarse lashes: 10-12minutes
C. REMOVE: • Gently remove #1 Lifting Cream using a
dry cotton tip only. • Do not use water.
4 – APPLY THE SILICONE SHIELD
A. Place the pre-adhesive shield directly eyelid
(not included in kit) — No adhesive required on the eyelid.
B. Position the shield as close to the lash line as
possible.
C. Press and hold the shield firmly on eyelid for
5–10 seconds until securely adhered.
5 – MIX FIXING CREAM #
2 + FIXER POWDER
A. In a small mixing dish, combine: 1 part Lash
Fixer Powder + 5 parts #2 Fixing Cream
B. Mix until smooth and fully dissolved.
C. Adjust consistency if needed:
• If too thin → add more Fixing Powder
• If too thick → add more #2 Fixing Cream
6 – APPLY CREAM #2 (FIXING CREAM) – LIFTING THE
LASHES ONTO THE SHIELD
A. Apply a thin layer of the Cream #2 mixture onto
the lashes while they sit on the shield.
B. As you apply, lift and guide the lashes upward
so they sit straight and evenly on the shield.
C. Keep a 1 mm distance from the lash line.
D. Apply from the base to mid-length of the
lashes.
E. Avoid the tips if your lashes are very fine or
light.
PROCESSING TIME: Use the same timing as Step #1:
7–12 minutes, depending on lash thickness.
REMOVE: • Gently wipe away Cream #2 using a cotton
tip.
• Do not use water.
7 – STEP 3: LASH NUTRITION SERUM
A. Gently remove the shields from the
eyelids.
B. Apply the Step 3 Nutrition Serum from base to
tip to soften, nourish, and condition the lashes.
C. Leave on for 5 minutes, then wipe away excess.
Do not rinse.
AFTERCARE INSTRUCTIONS
Avoid using mascara, water, sauna, and steam for
the first 24-48 hours after the lift. Avoid oils, lash curlers, shampoo and
lotions for 24-48 hours. Avoid rubbing your lashes for 24 hours. Sleep on your
back or side for 48 hours.
Avoid the following for 24–48 hours:
Mascara or any eye makeup
Getting the lashes wet
Steam, sauna, swimming
Rubbing your eyes
Hot showers
Oil-based products
Sleeping face-down
Creams or lotions around the eyes
WHAT TO AVOID AFTER LIFTING
Waterproof mascara
Oil-based removers
Rubbing or pulling at lashes
Lash curlers
EXTRA TIPS
TIP 1: Doing the application with a friend can make
it easier and more enjoyable. Follow each step carefully and watch a
tutorial video for guidance.
TIP 2: Don't rush through the process, take your
time. If you have any questions, feel free to contact our support team for
assistance.
TIP 3: We recommend to wait at least 4-6
weeks between lash lifting again to avoid over-processing.
TIP 4: Don’t use water to remove away creams.
TIP 5: Use an oil-free makeup remover. Avoid harsh
products.
TIP 6: Brush lashes daily to maintain shape.
TIP 7: Do not exceed recommended processing
timings.
Tip 8: Always patch test.
Brow Lamination
Step 1 – Preparation
Clean the eyebrow or eyelash area thoroughly to remove any
makeup, oils, or residue.
Step 2 – Apply Lifting Cream
Apply Lifting Cream evenly to the brows or lashes.
Processing time:
- Fine hair: 8 minutes
- Normal hair: 10 minutes
- Thick or coarse hair: 12 minutes
Once processing is complete, gently remove Cream 1 using a
dry cotton pad or applicator.
Step 3 – Shape & Set
Brush the brows or lashes into the desired position. Apply Fixing
Cream evenly over the hairs.
Processing time:
- Fine hair: 8 minutes
- Normal hair: 10 minutes
- Thick or coarse hair: 12 minutes
Remove Cream 2 thoroughly after processing.
Step 4 – Nourish
Apply Nutrition Serum and leave on for 5 minutes to hydrate and condition the hairs.
Important Notes
- Processing times may vary depending on hair thickness and skin type.
- If using plastic wrap, reduce the processing time to 5–8 minutes depending on the hair type and skin sensitivity.
- You don’t need to use the fixing powder for brow lamination.
